7
5、Operating instructions
5.1.Preparation before operation
√ The machine head shall be in the stop state when the operator checks it
√ Check whether the sewing thread has been put on correctly
√ Check whether the needle has been installed
√ Clean the sundries on the machine table to ensure that there are no sundries hindering
the operation of the machine
√ Check the pressure of the air pressure gauge to make it meet the use requirements of
the machine
5.2.Operation process description
5.2.1 Boot device
Rotate the power switch to the on position at 90 ° to power on the device.
The touch screen displays the power on interface. Select the language to enter the monitoring
interface
5.2.2 Operation process
a. Hem to waist:press
turn to green
1) Press pedal backward to lift the presser foot,Place the cloth in the work area,
Press the pedal forward to the position shown in the figure below and then stop,
Touch the 4microswitch with your foot, and the sewing mechanism moves to the
left (as shown in the figure below);
2) Step on the front pedal to the position shown in the figure below and stop. Touch
Содержание MB3005B
