background image

User manual W3532 

                                                                                                                 

 

- 3 - 

LAWN TRACTOR  W 3532

 

 
 

User and Maintenance Manual 

 

Dear Customer,  
Thank you very much for choosing our product and we are sure that it will fulfil all your expectations. Please 
read this Manual carefully and proceed exactly according to the instructions. By doing do, you will ensure 
the optimal use and the long service life of the self-moving cutter. You will correctly use your investment. 
The producer reserves the right to make any technical and commercial changes.  For this reason, your self-
moving rotary cutter may report some small differences compared with this Manual without change to the 
principal properties and the manner of operation of the machine. 
 
 

Design of the machine 

 
The machine is designed for cutting grass on treated areas of city greenery, sports sites, recreational areas, 
etc. 
 
 

CONTENTS 

 
1. Regulations concerning the protection and safety of health during work ...................................................... 3 
2. Marking and technical service........................................................................................................................ 4 
3. Unpacking and assembly ................................................................................................................................ 5 
4. User Manual ................................................................................................................................................... 6 
5. Maintenance.................................................................................................................................................. 14 
6. Lubrication plan – Fig.25 ............................................................................................................................. 21 
7. Basic specification and technical data for self-moving rotary cutters from the W3532 series .................... 22 
8. Electrical connection diagram – Fig.26 ........................................................................................................ 23 
9. Maintenance of accumulator ........................................................................................................................ 25 
10. Values of noise emissions and vibrations................................................................................................... 26 
11. Recycling .................................................................................................................................................... 26 

 

 
 
 
 

 

 
 

1. Regulations concerning the protection 
and safety of health during work 

 

Self-moving cutters of the W3532 series for cutting grass are 
produced according to the valid European safety standards. 
 
For the W3532 model, the cutting mechanism is mounted with 
a swath of 1220 mm. 
 
In the interest of security and the safety of other persons, keep 
to the principal regulations for correct use as mentioned below. 

  

 

The symbol 

 at the beginning of the text indicates 

regulations concerning safety.  Labels located on several areas 
of the self-moving rotary cutter are an integral part of the 
safety regulations and must not be removed or erased under 
any circumstances. 

 

 
 
 
 

Содержание COMFORT W3532




























Отзывы: