wirsbo FlowMaster, Руководство пользователя

Страница: 7 / 20

5
Wirsbo FlowMaster User Manual
Sectio
n
3
—
Setup Menu
3
WIRSBO
➜
SETUP
FLOW METER
➜
TEMP. ADJUST
FLOW ADJUST
To turn on the FlowMaster, press [ON/OFF] for a minimum
of two seconds.
When the start menu appears, press [UP] or [DOWN] to
select SETUP. Press [RIGHT] to confirm this choice and to
enter SETUP mode.
The display shows the measured temperature at the
sensor. If the temperature reading is not correct, the
temperature displayed can be adjusted. Adjust the
temperature by pressing the [UP] or [DOWN] key.
Save the selected value by pressing the [RIGHT] key.
To delete the adjustment, press the [LEFT] key.
Each instrument is factory calibrated. If the temperature
needs to be recalibrated, Wirsbo recommends doing so
only with the use of a certified instrument.
Press the [UP] or [DOWN] key to cycle through the
following functions.
• Temperature adjustment • Backlight
• Flow adjustment • Auto off
• Measuring units • Version
• LCD contrast
Select the appropriate function by pressing [RIGHT].
TEMP 70.0 º F
CANC OK
➜
➜
Temperature Adjustment
Turning on Power
The following appears in the display.
In SETUP mode, the following appears in the display.
Section 3 — Setup Menu
Note: Before using the FlowMaster for the first time, charge the battery for a minimum of
14 hours.