Wirepath WPS-365-DVR, Инструкция по установке и эксплуатации

Страница: 44 / 123

44
WPS-365-DVR-9CH & 16CH Installation and Users Manual
6.7. HDD SETUP
The HDD Setup allows the administrator to format/clear the hard drive, set Alarm Record partition size and
Normal Record partition size, and define the behavior for Alarm Record and Normal Record partition if the hard
drive becomes full. Any connected external ESATA drives can also be configured using this menu.
The following ESATA drives have been tested and verified to function with the 365 Series DVR:
The following is a brief description for each item in the sub menu and its specific operations:
Promise
®
SmartStor DS4600
In the Setup Menu display, press ▲▼◄► on the front panel of the DVR or on the remote to change the
highlighted option to HDD, and then press ENTER to display HDD Setup as shown.
To navigate and operate this menu:
•
▲▼◄►
Press these buttons on the front panel of the DVR or remote control to select an item.
Alternatively use the mouse to select an item.
• MODE
Press this button on the front panel of the DVR or the remote control to Format/Clear the HDDs as described
in Section 6.6.1. Alternatively use the mouse to select this option.
• SEQ
Press this button on the front panel of the DVR or the remote control to enter Advanced HDD Setup as
described in Section 6.7. Alternatively use the mouse to select this option.
• ESC
Press the ESC button on the front panel of the DVR or remote control to escape from this menu and
return to the main menu. Alternatively use the mouse to exit the sub menu by clicking on the “X.”
If the contents in this menu have been modified, a Save dialog box will be displayed requesting the
user to save the changes. Press ENTER on the front panel of the DVR or remote control to exit and save,
ESC to exit without saving. Another method to escape is to use the mouse to “right-click,” and exit the
sub menu.