WirelessHART Fieldgate SWG70, Руководство по эксплуатации

Страница: 84 / 124

14 Trouble-Shooting WirelessHART Fieldgate SWG70
82 Hauser
14 Trouble-Shooting
14.1 Network optimization
Once the WirelessHART network is running, there are some simple measures that will help to
enhance network performance and reliability. These measures are described in the following.
NOTE!
• After installation and configuration of the network, give it a couple of hours to stabilize itself,
before taking the following steps.
14.1.1 Verify Connections
Check that each device has joined the network and is communicating properly. If you cannot
establish a connection to a device, the device is probably too far away or an obstacle blocks the radio
waves. In this case, add an additional device to bridge the gap.
14.1.2 Eliminate Bottlenecks
If the messages of several devices all have to pass through one single device to get to the gateway,
the network has a bottleneck. If the device at the bottleneck fails, whole parts of the network get
cut off from communication because there are no alternative paths to route messages.
To eliminate bottlenecks in a wireless network, add at least one device near the bottleneck to
provide redundant communication paths. There should always be at least two communication
devices in each signal path.
Fig. 14-1: Eliminating a bottleneck by the addition of a devices
1 Device causing bottleneck 3 Additional adapter adds alternative routes
2 Fieldgate
PWR
COM
FLT
PWR
COM
FLT
PWR
COM
FLT
1
3
2