TextAlert
IV
User Manual
1 Introduction
Figure 1: TextAlert
IV
Product
The TextAlert
IV
(TA
IV
) product (Figure 1) provides an effective solution for simplified ‘early
warning’ SMS message and or voice call notification. The TA
IV
requires no additional PC
software configuration to function, making it easy and fast to set up and control via cell
phone SMS and or voice call commands.
The zone configuration procedure used for TA
IV
is quick and easy to perform, very similar
to that used for the popular VoiceAlert (VA6000S) system, and allows for linking of a range
of WirelessAlert sensors and remotes onto TA
IV
.
Cell phone configuration and control functions can only be performed with the use of a
password, thereby preventing unauthorised configuration or disarming of the TA
IV
.
Onboard status
LEDs
provide indication of the armed / disarmed status and GSM signal
reception. SMS messages can also be sent to the unit to request ‘armed / disarmed’ status
reports and other important status information (e.g. User can check at any stage if they
have remembered to arm the system by sending the SMS string
password#20#
to TA
IV
).
In addition, TA
IV
has on-board terminals available for connecting a range of peripherals
(e.g. External Siren, external speaker
,
security light or camera, and 3
rd
party wired sensor
monitoring devices). Please contact your WirelessAlert Agent for assistance with these
wired device features.
TextAlert
IV
can be configured to send confirmation (via SMS) of all configuration and
control commands sent to the unit. This feature assists the user particularly during the set-
up phase to check if configurations have in fact been performed. The SMS reply feature
can be deactivated, if desired, once user is happy that device has been set up correctly.
Note:
If you are not familiar with the range of WirelessAlert products and peripherals
available, please contact your WirelessAlert Agent or view the respective Products and
Peripherals on the WirelessAlert website (
2 Specifications
2.1
General
Dimensions: 6.7” (170mm) x 4.3” (110mm) x 1.25” (30mm)
Operating temperature: 0°C - 54°C (32 F – 130 F)
Waterproof specification: None
Copyright InFocus Trading 111 cc, 2009
3