manualshive.com logo in svg

Wireless WaveNet Link AX, Инструкция по установке и эксплуатации

Поделиться
Скачать
Wireless WaveNet Link AX Скачать руководство пользователя страница 6

vi

WaveNet Link AX Installation and Operations Manual

Welcome!

Welcome to the Wireless, Inc. WaveNet Link

™

 Series product family. This manual is designed

to introduce you to the Link AX

™

, and to provide you with information necessary to plan, install,

operate and maintain a Link AX wireless communication system.

The Link AX is intended for 

professional installation only

. This manual, however, is also

designed for personnel who plan, operate and administrate the Link AX communication system.
Please review the entire manual before powering up or deploying any Link AX.

Updates to this manual will be posted on the Wireless, Inc. Customer Service Website at
http://www.wire-less-inc.com. Registered Wireless customers can access Wireless’ on-line
information and support service, available 24 hours a day, 7 days a week. Our on-line service
provides users with a wealth of up-to-date information, with documents being added or updated
each month.

Radiation Warnings

Microwave Radio Radiation Warning

Under normal operating conditions, Link AX radio equipment complies with the limits for human
exposure to radio frequency (RF) fields adopted by the Federal Communications Commission
(FCC). All Wireless, Inc. microwave radio equipment is designed so that under normal working
conditions, microwave radiation directly from the radio is negligible when compared with the
permissible limit of continuous daily exposure recommended in the United States by ANSI/IEEE
C95.1-1991 (R1997), Safety Levels with Respect to Human Exposure to Radio Frequency
Electromagnetic Fields, 3 kHz to 300 GHz.

Microwave signal levels that give rise to hazardous radiation levels can exist within transmitter
power amplifiers, associated RF multiplexers, and antenna systems.

Never look into the open end of a Waveguide

 as eyes are particularly vulnerable to radiation.

Do not

 disconnect RF coaxial connectors, open microwave units, or break down any

microwave screening while the radio equipment is operating.

Содержание WaveNet Link AX















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды