Wireless la5570, Руководство пользователя

Страница: 15 / 115

Chapter 2: Getting Started
EN-15
2.2.3 Checking Device Received Signal Strength Indication (RSSI)
Short press the SET button at the back of the sensor twice .
The signal strength is indicated by its LED indicator.
• RSSI devices are including Button Console, Contact Sensor, Motion Sensor,
Smoke Sensor, AI Transducer, DI Transducer, and Siren.
2.3 Device Deletion
2.3.1 Device Deletion
To remove the device binding, press the SET button for 5 seconds. The LED
indicator blinks green and then turns off. After few seconds, the LED indicator
blinks red and then turns off again, indicating the deletion process is complete.
You can also remove the device binding on the web console. However, it is
only applicable for non-battery-power device.
• For CO
2
sensor, press both the  button until the screen blinks.
2.3.2 Reboot the Gateway
Unplug the power adapter from the Gateway and plug in again to reboot the
system.
2.3.3 Reset the Gateway
Press and hold the SET button for 15 seconds to reset all settings to the
factory default settings.
Status LED Color and Behavior
Good Blinks green (very quickly) for 15 seconds.
Normal Blinks green (quickly) for 15 seconds.
Poor Blinks green (slowly) for 15 seconds. (not recommended)
No Signal
Blinks red for 3 seconds and then turns off.
(not recommended)
Note