Point-to-multipoint operation
A multipoint W-DMX BlackBox system can support up to 512
individual receivers responding to a single W-DMX BlackBox
transmitter. All receivers in a multipoint system will listen only to
the designated transmitter and they will all receive the full 512
channels of the DMX universe. This makes it straightforward to
connect single fixtures or daisy-chained groups of fixtures to
any of the receivers in the system.
Point-to-point operation
Point-to-point systems are used when you want to send wire-
less DMX data from a console to a single receiver. As the
receiver accepts all 512 DMX channels from the transmitter you
can easily daisy chain more fixtures by cable from the original
fixture that is wirelessly connected.
Tx
Rx
Tx
Rx
Rx
wireless
wired
Overview
