1) Wire Routing Inside the Car
Please refer to wiring diagram for more details.
Please pay close attention to the color and connector size of each extending
cable. Wire routing should be installed from cameras to the host device side. All
the cables should be gathered to the host device side.
2) Camera Installation
Please refer to the corresponding section for detailed installation steps.
Embedded or out-cell installation for side cameras depends on the size of the
side mirrors as well as the space available for installation, especially for large
vehicles. Proceed with caution when dissasembling the side mirrors or drilling
installation holes to ensure that they do not break.
3) Host Installation
It is strongly recommended that the host be installed inside or behind the tool
cabinet, as this will ensure that the TF card or USB disk is easily accessible.
4) Wiring Test
Double check all of the wire connections before turning on the power. Do not
plug in live connections.
5) Functional Test
Test the main functions and settings of the host device.
6) Side Camera’s Angle Adjustment
Adjust the camera to select the proper angle at which side calibration tape is
overlapping with the reference guide line on the screen.
7) Camera Calibration
Step-by-step camera calibration can be accessed in the system menu. Once the
calibration data is completely collected, the system software will automatically
complete the video merging.
Instructions
© 2017 Wireless Prime INC. All Rights Reserved.
5
Installation Instructions
