Instructions
© 2017 Wireless Prime INC. All Rights Reserved.
11
There are 8 calibration points for each camera which need to be marked in the
screen. The third pixel point and fourth calibration point are always the diagonal
corner of the packing box. The packing boxes can be divided so that each
packing box can be used for calibration 1 camera each time.
NOTE: Put the 3 packing boxes in the correct position as illustrated in the
previous diagram. You may also use other boxes with dimensions of 90cm in
height instead as a calibration reference objects.
Once the cursor starts blinking, you can begin calibrating the four cameras one
at a time. Move the cursor to the corresponding locations by pressing the
directional buttons on the remote control, then press “ok” to mark the current
calibration point on the screen. The system menu will guide you to the next
calibration pixel point in order from 1 to 8, one at a time. Please see the correct
location and sequence of the calibration points as illustrated below:
Press “MODE” to toggle to previous calibration point selection when needed.
NOTE: The locations of the 7th and 8th calibration pixel points are different
between the front and rear cameras and the left and right cameras. The more
accurate calibration points you mark, the better quality the panoramic image
merging will be.
Position Calibration
