Wired W36 Series, Инструкция по эксплуатации

Страница: 72 / 80

TROUBLESHOOTING
72
TOUBLESHOOTING
Solution Trouble Possible Cause
The watch temporarily
gains or loses time.
The watch has a time-
lag on an hourly basis.
Place the watch where it can receive radio signals more easily. Conduct the manual reception if
necessary. For details, refer to "Conditions in which the watch may be unable to receive radio
signals" on P. 57 or "Adjust the Time by Receiving Radio Signals (How to Carry Out Manual
Reception)" on P. 58.
Check the city code setting of the home time to reset.Set the city code to TYO (Tokyo) to display
Japanese time.For details, please refer to the "Various Settings" on P.47.
When DST is displayed at the left lower portion of the home time display, the summer time has been set.
If the summer time setting is not required, turn off the summer time setting.For details, please refer to the
"Various Settings" on P.47.
When the watch returns to normal temperature, the condition will be corrected. Conduct the manual
reception if necessary. For details, refer to "Adjust the Time by Receiving Radio Signals (How to Carry
Out Manual Reception)" on P. 58. If the watch hands are not set to current time even after conducting
the manual reception, consult the retailer from whom the watch was purchased.
The watch receives a wrong radio
signal because of a result of
influence of various external
The city setting of the home time
that has been set to a city or region
that differs from what you intended.
The watch has been left in
extremely high or low temperatures
for a long time.
The summer time (DST) has been
set to the home time.
Display of
incorrect time
or
misalignment
of the hands