2
TORCH WIZARD INSTALLATION & OPERATION MANUAL
1.2 PRODUCT REGISTRATION
Please register this product online or by phone within 14 days after receipt.
Register this product online by going to
wire-wizard.com/register
or scanning the QR code on the
right, or you may call 517.782.8040 to register by phone. Registering this product will allow us to
provide firmware and software updates via email, as well as expedited service should there be any
problems potentially covered by this warranty in the future.
Please record the following information for this product and retain for your records:
Model #:
Lot #:
Shipment Date:
1.3 MODEL INFORMATION
1.4 SAFETY
The Torch Wizard® Nozzle Cleaning Station is designed to be safe to operate, provided the user reads, understands and
adheres to the safety precautions listed below. Failure to adhere to these precautions may result in personal injury and/or
damage to the equipment.
1. Do not remove or deface any labels that are attached to the unit.
2. Ensure that all equipment in the area is disabled and locked out prior to entering the work zone where the
Torch Wizard® is located.
3. Ensure that all electrical and air power is disconnected prior to performing any maintenance on the Torch Wizard®.
4. Keep hands and face away from clamp, reamer and spray operating space during both automatic and manual operation.
5. Ensure that all electrical and pneumatic connections comply with the codes relevant to the country and/or state where
the Torch Wizard® is installed.
6. Do not exceed the specified operating air pressure.
7. Ensure that there is no equipment (e.g., robot) in the Torch Wizard® prior to shutting down the system.
8. Additional safety information can be found at the following websites:
▶
osha-slc.gov/SLTC/robotics/index.html
▶
ansi.org
▶
nfpa.org
Model
EL-NCS-20
▶ Base Unit
▶ No anti-spatter spray components
(dry ream only)
Model
EL-NCS-20-SC
▶ Base Unit
▶ No anti-spatter spray components
(dry ream only)
▶ Self-cleaning air blast
Model
EL-NCS-C-20
▶ Base Unit
▶ No anti-spatter spray
components (dry ream only)
▶ Wire Cutter
