feeling for more
02
feeling for more
Before carrying out any adjustments or servicing , make sure the installation is
disconnected from the power supply .
2. Caution
WARNING
Thank you for buying WIPCOOL Robust Series oil charging pumps ,pls check if
your ordered goods in good shipment condition,with the correct accessories.
This manual gives instructions on the correct installation , It’s important that you
follow this instructions carefully.
1. Notice for Use
Don’t run this pump without oil .
Don’t run in the place with explosion hazard and inflammables
WARNING
Don’t touch the motor and pump after running long-time to prevent to scald the
hand.
WARNING
01
3.1.2 Technical Data
Model
Voltage
Suit for oil viscosity
Motor
Flow rate
Max.Pressure
Outlet port
Weight
R6
3/4HP
350L/h
2.5MPa(362psi)
1/4" & 3/8" SAE
10.4kgs
Robust Series electric oil charging pump is designed according to the feature of
compressor oil supplement or change. It’s body adopts with integration gear pump.
Robust series pump is suitable for all kinds oil, especially for high viscosity oil and low
temperature conditions; big flow rate, low noise, convenient carrying with toolbox, safety
and reliability with thermal protection.
3. Product Introduction
3.1 Product Overview
3.1.1 Scope of use
Robust series electric oil charging pump is one of the special equipment used for
refrigerant oil supplement and replacement of compressor. It can fill all kinds of
refrigerant oil.
R4
1/3 HP
150 L/h
1.6MPa(232Psi)
1/4" & 3/8" SAE
5.6kgs
All kinds oil
230V~/50-60Hz
115V~/60Hz
230V~/50Hz
115V~/60Hz
All kinds oil (Especially
high viscosity oil)
