2E1 to 2Eth Converter
４
General Safety Requirements
Please read the following notes on safety, so as to avoid personal injury, and
prevent this product as well as any other products connected with it from
damaging. In order to avoid the possible danger, it
’
s only permitted to use the
product in specified ranges.
Only the technicians authorized by our company can implement the
relative maintenance work.
Avoid Fire or Personal Injury.
Use appropriate power supply.
Check the type of power supply for this product
as well as the polarity carefully.
Correct connection and disconnection.
When the equipment is in power-on
condition, do not connect or disconnect the data cable casually.
Product Earthing.
In order to avoid electric shock, the earthed conductor must be
connected with the ground. Before it is connected with the input or output terminal
of this product, please ensure that this product has been earthed correctly.
Correct connection.
When connecting, Please use the factory-providing
accessories. If special connecting, please pay attention to the distribution
requirements for pins.
Avoid touching the exposed circuit.
When this product is electrified, do not
touch the exposed connection points or components.
When there is suspected fault, do not operate.
If you doubt that this product has
been damaged, please have the technicians authorized by our company to do
maintenance.
