Assembly instructions
|
89014664; 2022-04
|
5
Depending on the configuration of the transfer strip, voltage is present at the RINSE and DETERGENT terminals.
Terminal
Voltage present
Condition
Restriction
DETERGENT
While machine fills
– Door closed
– Minimum water level
in the tank
Parallel to solenoid valve
– While machine fills
– During the rinse
– Door closed
– Not in the drainage programme
WASH
Parallel to wash pump
– Door closed
– Not in the drainage programme
– Not while the machine is being filled
– Not during the descaling and basic clean-
ing programme
RINSE
Parallel to rinse pump
– Door closed
– Not in the drainage programme
Parallel to solenoid valve
– While machine fills
– During the rinse
– Door closed
– Not in the drainage programme
6
Start up the dosing device
Ø
Close the cover of the warewasher.
Ø
Switch on the mains voltage and switch on the warewasher.
Ø
Put the dosing device into operation properly.
Ø
Carry out safety inspection in accordance with DIN VDE 701.
Ø
Activate several washing programmes and check the warewasher and installed components for leaks.
7
Configuring the transfer strip
The transfer strip is configured in the chef menu.
Access the chef menu
1575
A PIN protects the menu from unauthorised access. The PIN is 1575. If you enter your PIN incorrectly three times in a row, input will be
blocked for 10 minutes.
Setting the detergent dosing device
2
1
3
Item
Name
Note
1
Reset to default setting
2
While machine fills
For dosing devices with a fixed output (type-dependent)
Parallel to solenoid valve
For dosing devices with adjustable output
3
Save settings
