2
|
89014664; 2022-04
|
Assembly instructions
3
Connecting the dosing tubes and suction tube
Terminals
5
4
3
2
1
Item
Name
Note
1
Connection for detergent dosing hose
Hoses with 5 mm inner diameter
2
Connection for rinse aid dosing hose
Hoses with 4 mm inner diameter and 1 mm wall thickness
3
Transfer strip for external dosing devices
4
Plug for rinse aid suction tube
Blue plugs
5
Plug for detergent suction tube
White plugs
Ø
Disconnect the warewasher from the electrical mains supply and secure against unintended activation.
Ø
Remove the lateral cover from the warewasher.
Ø
Install the dosing device on-site.
Ø
Fasten detergent dosing hose to detergent connection (1) with wire hose clip.
Ø
Plug the rinse aid dosing hose into the plug connection (2).
Ø
Connect the connection cable of the suction tube on the plug (4 / 5).
Ø
Ensure that the dosing hose and connection cable are guided kink-free.
Note: Rinse aid dosing device must dose against pressure. Pressures of up to 2 bar are present at the boiler of the machine.
Also take into account the height difference between the dosing device and machine. A non-return valve is installed in the ma-
chine.
