* Optional 128KB or 512KB external cache
* Three 16bit slots and Four PCI slots
* Dimension: 19 x 22.5 cm with 4 Layers
* Two clock source, supporting system running from 25 to 50 MHz, PCI
clock running ASYNC or SYNC
* Support System Memory Management (SMM) for Power Management
* Support full SMI Interface
* Power Management port for specific control during all modes of operation
JUMPERS AND CONNECTORS REFERENCE
================================
Before installing the motherboard, make sure the jumpers setting are set for
your configuration. The Function of each jumpers are as follows:
CPU Type Selector ....................... JP14,JP15,JP16,JP17,JP18,JP29
JP21,JP23,JP24,JP25,JP26
SL-enhanced CPU Selector ................ JP6,JP10,JP18,JP28
CPU VOLTAGE Selector .................... JP30
CPU Clock Selector ...................... JP31,JP32
P24C (DX4) Clock selector ............... JP16
PCI Clock Selector ...................... JP33
Cache Option............................. JP13,JP19,JP22
Charge / Discharge CMOS ................. JP1
CRT Power Down .......................... JP3
SMI LED ................................. JP38
Speaker Connector ....................... JP41
Turbo Switch Connector .................. JP40
Turbo LED Connector ..................... JP39
Reset Connector ......................... S1
External Battery Connector .............. J2
Keylock/Power LED Connector ............. J9
Keyboard Connector ...................... J1
Power Supply Connector .................. PL1
Micellaneous Jumpers .................... JP4,JP5,JP27
NOTE:
RED Jumpers Represent Voltage Selector
White Jumpers Represent CPU Type
Yellow Jumpers Represent Clock Selector
Blue Jumpers Represent Cache Option
Black Jumpers Represent Others
JUMPER SWITCHES
===============
These switches consist of two or three pins set in a plastic base. Two of
the pins are covered by a cap which connect or short each other. It is
