6
Programmable Key Setting
Programmable Key P1~P3 functions are operable only by
dealers. It is not intended for use by general consumers.
The the functions for P1~P3 can be defined separately in
long or short press on the buttons.
The Factory Default on programmable keys:
P1 in long press: No use, short press: Noise Cancel
P2 in long press: Monitor, short press: Backlight
P3 in long press: No use, short press: Low and High Power
Switch
The radio will send out "Do Re Mi" melody to remind you that
Noise Cancel is on and send out " Do" melody when the
Noise Cancel is off.
Function button
P1~P3
Explanation
0. None
Assign the buttons to be no use.
1. TA
(Talk Around)
The setting on transmission channel will
change to the same as the receiving
channel, including the frequency.
2. Scan
Channel Scanning will perform to scan the
Pri channel if it is set in advance. If not, the
radio will perform the general scanning on
channels.
3. Power Switch
It can temporarily switch to High or Low
power when press this button. The change
on the channel will restore to the factory
setting.
4. Noise Cancel
NC function can elevate the quality of voice
in communication.
5. Key Lock
Press the button once to enable or disable
the keylock. When keylock is enabled, you
are not able to change the channels and
functions.
6. SendCall
Long Programmable Keys can set Send
Call tone function.
Press the button longer to send out the call
tone. Release it to stop the transmission.
7. Monitor
Long Programmable Keys can set Monitor
function.
Press the button longer to enable the
monitor function, release the button to stop
in monitoring.
