Table of Contents
1
1. Front panel
2. Rear panel
1
2
3
4
6 COMPONENT VIDEO OUT:
8
RF IN :
This socket connects to your external TV antenna.
RF LOOP THROUGH:
This socket will feed through the TV RF signal to
either your
TV or
another video system.
COAXIAL:
This RCA socket connects to the Coaxial digital audio input
socket on your surround sound system.
HDMI:
These three RCA sockets connect to your TV
component video input terminals.
7
MAINS CABLE:
This is used to connect to your mains power supply.
High definition audio and video output used to connect to an HDMI
equipped device (eg. flat screen TV).
5
VIDEO:
This RCA socket outputs a composite video signal.
AUDIO L/R:
These RCA sockets output Analog Audio L/R signals.
Front and Rear Panel
100-240V
~
50/60Hz
1
2
3
4
5
6
7
8
Front and Rear Panel.............................................................................1
Remote Control.....................................................................................2
Connecting to a Television......................................................................3
Connecting to a DVD Recorder or VCR....................................................3
Connecting to an Audio System..............................................................4
First Time Installation.........................................................................4-5
Menu settings....................................................................................5-9
Electronic Program Guide (EPG)............................................................6
USB Personal Video Recorder (PVR)..................................................9-11
Troubleshooting..................................................................................12
Technical Specifications......................................................................12
1 POWER BUTTON:
Used to turn on/off the main power supply.
2 STANDBY INDICATOR:
Used to visually show power state of the set top
box, the LED will turn red if the set top box enter standby mode.
3
4 REMOTE CONTROL SENSOR:
Used to receive the signal from the remote
control.
5 USB:
6 CHANNEL UP/DOWN:
Used to change channels without using the remote
control.
LED DISPLAY WINDOW:
Used to display channel number.
Data input from USB storage devices.
