manualshive.com logo in svg

WinSystems SYS-405, Руководство по эксплуатации продукта, Страница: 50 / 57

Поделиться
Скачать
WinSystems SYS-405 Скачать руководство пользователя страница 50

SYS-405/BIOS Settings

v1.0

www.winsystems.com

Page 46

Press 

Enter

 to set or clear the supervisor account’s password. Press 

Esc

 to exit without 

making changes.

Supervisor Hint String

Press 

Enter

 to type a hint for the Supervisor password. If you forget your password, the 

answer to your hint will help you recover the password.

Set User Password

Press 

Enter

 to set or clear the user password. Press 

Esc

 to exit without making 

changes.

User Hint String

Press 

Enter

 to type a hint for the User password. If you forget your password, the 

answer to your hint will help you recover the password.

Min. password length

Sets the minimum number of characters for your password (1-20).

Default Setting/Value: 1

Authenticate User on Boot

Enables or disables user authentication prompt on boot.

Default Setting/Value: Disable

HDD Security Status

If no hard disk drive is detected, this is blank.

No HDD Detected

This is displayed when no hard disk drive is detected.

Trusted Platform Module (TPM)

This is the name of the next variable. 

TPM Not Detected

This is the TPM variable current state.

Содержание SYS-405


























































Отзывы:

Нет отзывов