PPC65B-1x/BIOS Settings
v1.0
www.winsystems.com
Page 49
Super I/O Configuration
Use the Super IO Configuration screen to set the System Super IO Chip Parameters.
Serial Port
Enable or Disable Serial Port (COM) IO=3F8H; IRQ=4. Choices: Disabled, Enabled
(Default).
Interface
Set present UART mode RS232, RS485, RS485/RS422. Choices: RS232(Default),
RS485 HALF DUPLEX, RS485/422 FULL DUPLEX.
Termination Control
Set Termination Control to Disabled/Enabled. Choices: Disabled, Enabled (Default).
Direction Control
Set Direction Control to Enabled (Transceiver) or Disabled (Receiver). Choices: Disabled
(Default), Enabled.
Serial Port
Enable or Disable Serial Port (COM) IO=2F8H; IRQ=3. Choices: Disabled, Enabled
(Default).
Interface
Set present UART mode RS232, RS485, RS485/RS422. Choices: RS232(Default),
RS485 HALF DUPLEX, RS485/422 FULL DUPLEX.
Termination Control
Set Termination Control to Disabled/Enabled. Choices: Disabled, Enabled (Default).