Gate A20 Option
This option allows for the selection of the source for the gate A20 signal. The choices
are:
NOR MAL
FAST
Type matic Rate Setting
This en ables or dis ables type matic rate pro gram ming at boot time. Type matic is the
auto- repeat func tion for the key board.
Type matic Rate
When the type matic rate set ting is en abled, the type matic re peat speed is set via this
op tion. The sup ported rates are :
6 char ac ters per sec ond
8 char ac ters per sec ond
10 char ac ters per sec ond
12 char ac ters per sec ond
15 char ac ters per sec ond
20 char ac ters per sec ond
24 char ac ters per sec ond
30 char ac ters per sec ond
Type matic Delay
When type matic rate set ting is en abled, this op tion speci fies the time in mil li sec onds
bef ore auto- repeat be gins. The sup ported val ues are :
250mS
500mS
750mS
1000mS
Se cu rity Option
This op tion al lows you to limit ac cess to the sys tem and setup, or just to setup. The
choices are :
Sys tem - The sys tem will not boot and ac cess will be de nied if the cor rect pass word is not en tered at the
prompt.
Setup - The sys tem will boot, but ac cess to Setup will be de nied if the cor rect pass word is not en tered at
the prompt.
021402
OPERATIONS MANUAL PCM-586
Page 3-8
WinSystems
- "The Embedded Systems Authority"
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
