COMeT10-3900/BIOS Settings
v1.1
www.winsystems.com
Page 22
4.3.18 Intel I210 Gigabit Network Connection 1 & 2
Configure the Intel I210 Network Interface Controller (NIC), and view
specific technical information such as link status, and MAC address.
4.4
Security
Set various passwords, and specify how and when these passwords are
used to protect the system.
Feature
Description
Choices
Default
NIC
Configuration
Provides options to configure the link speed and enables/disables Wake on Lan.
• Link Speed Specifies the port speed used for the selected
boot protocol.
Auto
Negotiated,
10 Mbps Half,
10 Mbps Full,
100 Mbps Half,
100 Mbps Full
Auto
Negotiated
• Wake on
LAN
Enables/disables the server to be powered on
using an inband magic packet.
Enable, Disable Disable
• Blink LEDs
Specifies the number of seconds to blink LEDs.
This function provides the ability to physically
view which Ethernet NIC is #1 or #2. To blink the
integrated LEDs on the RJ45 connector, type a
number from 0 to 15 (seconds) then press Enter
to blink the LEDs for that amount of time.
0 - 15
0
