Winston PRO 20 EVI, Инструкция по установке и эксплуатации

Страница: 31 / 35

30
Appendix
Appendix 2
：
The installation explanation of automatic filled-water
1 When automatic filled-water valve is installed,the arrowhead orientation of inlet water must
accord with the orientation of valve ;
2 Automatic filled-water has been adjusted in advance to 1.5bar
；
3 If readjust the pressure of inlet water,please operate as follows
：
* open the screw cap
（
C
）；
* If reduce the pressure of water supply,pease unscrew the pressure to adjust the screw(B)
；
* If increese the pressure of waer supply,please screw down the pressure to adjust the screw (B)
4 When the system need fill water at first,wrest the handle(A) of filled-water.Then the handle(A)
can return(close) when the system is full of water.
5 Automatic filled-water Valve need clean in a periodic time and then you must close the tap,
unscrew the plug(D),remove the inside filter net.Please assemble them again after cleaning.
NOTICE
：
There are two connections for water pressure meter in the central section of
automatic filled-water,where the water pressure meter can be connected directly
and display the set pressure.The screw cap(C) must be tweaked after adjusting
the filled-water pressure.
B
C
1/4'
1/2'
D
A