22
Intel® E3845 4 LAN 1 COM AES-NI 4G Fanless Firewall Router
MNHO-073
© Copyright
Winston Marriot Ltd.
All Rights Reserved.
www.pondesk.com
3.6.5 SATA2
Onboard SATA2.0 interface can support up to 3Gb/s. One 2pin +5V A2501WV-2P SATA
power connector.
For power connectivity of SATA drives. The pinout of the SATA connector is shown in the
image.
3.6.6 USB (2.0 & 3.0)
There are two USB interfaces USB2.0 & USB3.0.
The USB3.0 port has a maximum data transfer rate up to 5 Gbps
and offers a backwards compatible with previous USB2.0
3.6.7 BAT1 (CMOS)
CMOS battery connector labeled as “BAT1” equipped
with TOSHIBA CR2032 3V external CMOS cable
battery, provides power to the CMOS memory. All
configurations in the CMOS memory will be reset to
factory defaults if battery is disconnected.
3.6.8 FP1
Front panel FP1 (2*7) pin interface integrated with HDD_LED, PWR_LED, ON/OFF, reset
switch, SPEAKER function.
The connector pinout is shown below.
PINS
SIGNAL
1, 3
Hard disk LED (+ and
–
signals)
2, 4
Main power indicator (+ and -)
5, 7
Motherboard reset (+ and -)
6, 8
Motherboard ON/OFF (+ and -)
9, 10
Buzzer connector
