OPERATING INSTRUCTIONS FOR THE
EAGLE V42-DD HOT-AIR WELDING TOOL
CONGRATULATIONS!
You have purchased an Eagle, a tool that is designed and manufactured to assist
you with a quality seam weld. NOTE: The Winston Group does not warrant seam performance. We supply
a tool which provides heat, speed, and pressure. You, as the operator, select the correct combination of
these three components and, like all tools, the most important factor to a quality seam is your skill and
experience in setting up and using the Eagle.
WARRANTY CARD.
A postage-paid warranty card is included in the shipping box. Please fill it out so that
we can provide you any new product information or "tips" for better welding. The serial number of your unit
is located on the handle of the gun assembly.
READ THESE INSTRUCTIONS
Any new tool requires familiarity. Take
fifteen minutes of time to get
acquainted with your purchase. These
instructions are intended to guide you
through connection, operation, trouble
shooting, and maintenance. If you have
any questions or problems in start-up,
give us a call at:
1-630-231-0419
[email protected]
THE WINSTON GROUP LTD
1092 Carolina Drive, Suite 1
Phone:1-630-231-0419
West Chicago, Illinois 60185
Fax: 630-231-0429
www.winstongroup.com
COOL DOWN 10 MINUTES
CAUTION AS V42DD MOVES BACKWARD
Fig. #1
