Winston foodservice Collectrmatic Скачать руководство пользователя

Страница: 6 / 8

Winston Foodservice | 2345 Carton Drive | Louisville, Kentucky 40299

800.234.5286 | +1.502.495.5400 | www.kfcfryers.com

Page 6 of 8

4272y185rev13_01-20-17_instructions_fryer_maintenance_kfc

High Limit Mounting acceptable = Pass High Limit Thermostat Inspection

High Limit Mounting not acceptable = Fail and Remove Fryer from Use until Repaired

Heater Inspection

- Inspect heaters to ensure that all three heaters are securely mounted in their clamps

and they are not bent and obstructing operation through the use of a basket, cleaning, or any other

normal operational use.

All Heaters are secured and acceptable = Pass heater inspection

Heaters not acceptable, but not obstructing = Fail and Repair Promptly

Heaters not acceptable and obstructing = Fail and Remove Fryer from Use until Repaired

Probe Inspection

- Inspect to ensure proper temperature probe position (Fig. O). Inspect to ensure that

the probe is not missing, cracked, or bent.

Probe acceptable = Pass Probe Inspection

Probe not acceptable = Fail and Repair Promptly

Power Cord Inspection

- Inspect power cord and plug for loose or frayed connections. Check for

cracked plug.

Plug and Cord acceptable = Pass Power Cord Inspection

Plug and Cord not acceptable = Fail and Remove Fryer from Use until Repaired

Fig. O - Temperature Probe

Winston Probe

Fastron Probe

Содержание Collectrmatic









Результаты поиска

Содержание Collectrmatic

Отзывы:

Похожие инструкции для Collectrmatic

Бренды по названию

Популярные бренды

Winston foodservice Collectrmatic, Руководство по обслуживанию

Результаты поиска

Содержание Collectrmatic

Отзывы:

Похожие инструкции для Collectrmatic

Бренды по названию

Популярные бренды