Page: 4
Instruction, Use & Care Manual
Please save this manual for future reference.
Product Name:
LED Solar Motion Sensor Wall Light
SKU #:
WHSL449
Troubleshooting:
Light will not switch
on when there is
movement in the
detection area
Ensure that the power switch on the main body has been turned to the AUTO or ON position.
Ensure that the motion sensor has been positioned to face oncoming movement.
Ensure that the battery has been fully charged in direct sunlight for one sunny day.
Check to see that the solar cell charge panel is facing south so that it receives direct sunlight for
most of the day, enabling the battery to fully charge.
Check to see that the solar panel is not near the night time light sources, such as street lights.
Light switches on
during the day
Ensure the wall light is not placed in shady area.
Ensure the solar panel is facing towards direct sunlight.
Light switches on for
no apparent reason
Moving trees, traffic, pet, or birds may be getting in the area of detection. This may be unavoidable;
however, the sensor could be redirected to a height where this less likely to occur.
If there are reflective objects in the detection area, such as windows, water, or white walls, you may
need to redirect or possibly reposition the motion sensor.
Test the motion sensor by covering it completely with cardboard, and waiting several minutes to
make sure it does not detect motion.
Light quickly flashes
on and off
Battery charge may be low. Turn the power switch to the OFF position and charge the battery for
two (2) sunny days, ensuring the solar cell charge panel has been placed in direct sunlight.
Light is not as bright as
normal
Battery charge may be low. Turn the power switch to the OFF position and charge the battery for two (2)
sunny days, ensuring the solar cell charge panel has been placed in direct sunlight.
