Antenna Systems
9.
The coaxial cables many now be installed. First lower the antenna assembly, and attach the Horizontal antenna to the
vertical antenna. This requires a shifting spanner. Note: The connectors have inbuilt rubber sealing mechanisms, and
so the need be made firm, but not over tight. Slide the connector boot on the cable over the connector, and the hori-
zontal antenna installation is complete.
10.
Following the routing shown below, attach the signal booster to the mounting boom. This will be achieved by removing
the adhesive paper from the underside of the booster and attaching it midway between the cable tie retainers
Note: It
is very important not to bend the RF cable into tight radii, gently bend the cable into generous radii with your
thumbs. This will damage the internal insulation, and affect the resulting reception of the antenna.
11.
Now cut the existing antenna cable from the caravan to a length of 650 mm from the van roof. Install the suppled rub-
ber boot onto the existing cable, and then attach the new connector provided.
Note: Detailed installation instructions
for connector are provided on following page.
