Winplus Yada YD-V31, Руководство пользователя

Страница: 9 / 16

A. Power ON/OFF
To turn the YD-V31 ON:
• Press and hold the
Main Button for 1 second then
release
• The blue LED indicator will flash twice every 2 seconds
and hear 3 tones
To turn the YD-V31 OFF:
• Press and hold the
Main Button for 2 seconds (in any
mode) then release
• The red and blue LED indicator will flash for 1 second
and hear 4 tones
B. Pairing/Linking
Pairing Bluetooth
®
enabled devices like mobile phones with
the YD-V31 Speakerphone with Headset authorizes hands-
free communication. This step only needs to be performed
once.
Before Pairing the YD-V31 Speakerphone with Headset:
• Ensure the YD-V31 is fully charged
• Ensure the YD-V31 is OFF
• Ensure the Bluetooth
®
on your mobile phone is activated
Follow the steps below to pair your YD-V31 with your mobile
phone:
• Press and hold
Main Button for 3 seconds
• The LED indicator alternately blinks red and blue and emit
3 tones
NOTE: YD-V31 is now in pairing mode
• Activate the Bluetooth
®
settings of your mobile phone
NOTE:
The following steps are general procedure; to access
Bluetooth
®
Menu for you mobile phone, please refer to your
phone user manual.
• Select SET-UP or CONNECT from your mobile phone
menu
• Find and select OPTION to discover Bluetooth
®
devices;
establishing a connection may take several minutes
• If found, phone display should indicate YD-V31 device
was detected or Select “ YD-V31 ” from the list
• Phone should give you a prompt asking if you want to pair
the device
• Select OK or ACCEPT and wait for prompt to enter passkey
or PIN
• Enter the code
0000
• Select “OK” to pair and connect the YD-V31 and the
handset
NOTE: If the YD-V31 and mobile handset did not successfully
pair, follow the steps below to retry pairing:
• Turn the YD-V31 OFF
• Turn OFF all other Bluetooth
® devices before starting the
pairing process
• Repeat the pairing instructions from the beginning
NOTE:
• If pairing is successful, the blue LED indicator will flash 3
times every 2 seconds
• Pairing mode will last about 2 minutes. If pairing cannot
be established within 2 minutes, the headset will go into
standby mode. To pair, follow the pairing instructions.
• YD-V31 can be paired with up to 8 Bluetooth
®
enabled
devices.
8