Winplus Yada YD-V31, Руководство пользователя

Страница: 8 / 16

The YD-V31 is equipped with a built-in rechargeable
Li-Polymer battery, which provides better than normal phone
battery life span.
NOTE: The YD-V31 Speakerphone with Headset battery
comes pre-charged, however the battery will discharge if the
device is not used for a long time.
A. Low Battery Indication
Recharge battery when:
• Indicator light turns red and flash twice every
3 seconds
B. Charging
Speakerphone:
Follow the steps below when charging the YD-V31
Speakerphone:
• Insert the charging cable to the USB charging port of
the YD-V31
• Plug the cable to a power port
• When the device is in charging mode, the red indicator
light is on indicating that charging is in progress
NOTE:
• Standard charge time is around 3 hours
• Battery indicator light will turn off once fully charged
• Disconnect the charger cable once the battery is
fully charged
Battery Operations
Headset:
Follow the steps below when charging the YD-V31
Headset:
• Place the headset into the charging cradle on the
YD-V31 Speakerphone
NOTE:
• The headset will be charged by the speakerphone
internal battery
• If the speakerphone battery needed charging, follow
the steps for charging the YD-V31 speakerphone
• Disconnect the charger cable once the battery is
fully charged
IMPORTANT:
Do not leave the YD-V31 Speakerphone
with Headset charging in the vehicle unattended.
NOTE: To charge the unit at home, use a 12V DC to AC
convert or use a USB Power Outlet.
Operations
power button
power indicator
microphone
power indicator
volume up volume down
speaker
microphone
USB outlet
7