RFID Reader Module
- 6 -
Interface definition
Pin
Signal name
Signal direction
Function/compatibility description
1
VCC
Input
Module supplying power
2
VCC
Input
Module supplying power
3
GND
-
Module connecting ground
4
GND
-
Module connecting ground
5
EN
Input
Module enabling
，
highly effective
6
GPIO
Bidirection
Generic port
7
GPIO
Bidirection
Generic port
8
GPIO
Bidirection
Generic port
9
UART_RX
Input
Asynchronous serial interface receiving
10
UART_TX
Output
Asynchronous serial interface sending
11
DBG_RX
-
Test port
12
DBG_TX
-
Test port
OEMs
information: RealID Technology Co., Ltd. was established in December 2012, the
registered capital of 990 million yuan. It is a professional company specializing in RFID system
design, equipment development and related technical services. RealID Technology Co., Ltd.
gathered a number of highly qualified management personnel, first-class product development
elite, to provide customers with first-class hardware products, program design, and custom
services.
Changes or modi
fi
cations made to the equipment not expressly approved by Winnix may void the
FCC / IC authorization to operate this equipment.
The use of the transceiver module is authorized in mobile or
fi
xed host devices taking into account
the conditions listed below
:• OEM Integrator must ensure that the end user manual may not contain any information about
the way to install or remove the module from the
fi
nal product.
• Depending on the
fi
nal host device additional authorization requirements for the nontransmitter
functions of the transmitter module may be required (i.e., Veri
fi
cation, or Declaration of
Conformity) The OEM integrator is responsible for ensuring that a er the module is installed and
operational the host continues to be compliant with the Part 15B unintentional radiator
requirements.
• The information on the label and in the user manual is required to be incorporated in the user
manual of the
fi
nal host. see 47 CFR15 requirements for more details (e.g. 15.19 / 15.21 / 15.101 /
15.105 / RSSGEN / ICES)
• Additional label with the words ‘Contains FCC ID: RVZHYM7
4
0’ shall be applied and visible
from the outside of the host product.
