Winner WS-929A, Руководство пользователя

Страница: 16 / 16

Care of the tip
The tip supplied is iron plated copper. If used properly, i twill last a long time.
1. Always keep tips tinned before switching off or storing for any period of time; wipe only
before use.
2. Do not keep the iron set at high temperature for a long period of time as this will break
down the surface of the tip.
3. Never clean the tip with coarse abrasive materials of files.
4. If an oxide film does form it can be cleaned by lightly rubbing with a 600-800 grit emery
cloth. Isopropyl alcohol or equivalent and then immediately recheat and te – tin the tip to
prevent oxidation of the wettable surface.
5. Remove the tip and clean every twenty hours of use or at least once a week and
remove any loose build up in the barrel.
6. Do not use fluxes containing chloride or acid. Use only rosin or activated resin fluxes..
7. Do not use any compound or anti – seize materials on the wettable surface.
Maintenance
Tip replacement and dressing
Note: Tip replacement or cleaning should be done when the iron is at room temperature.
The tip can be changed or replaced simply by unscrewing the knurled unit barrel
assembly. The station must be switched off and allowed to cool before and during this
operation as damage may result if the system is left on without the tip inserted. After
removing tip, blow out any oxide dust that may have formed in the tip retaining area of the
barrel. Be careful to avoid getting dust in your eyes. Replace the tip and screw the
retaining knurled nut barrel assembly using only hand pressure to tighten. Pilers should
only be used to tighten the nut if loosening should occur when the iron is hot to avoid
burning your fingers. Care should be taken not to overtighten as this would damage the
element.
General cleaning
The outer case of the iron or station may be cleaned with a damp cloth using small amount
of liquid detergent. Never submerse the unit in liquid or allow any liquid to enter the case of
the station. Never use solvent to clean the case.
Melchioni S.p.A.
Via P. Colletta, 37
20135 MILANO – Italy
Tel. +39 02 5794384 – Fax +39 02 5794320
www.melchioni.it