Winnebago Ultimate Advantage, Руководство пользователя

Страница: 76 / 150

SECTION 6
ELECTRICAL SYSTEMS
6-4
Certain circuits, however, remain unchanged
for use by items which require 110-volt current,
such as the air conditioner(s), the refrigerator in
AC mode, the microwave oven, etc.
Current drawn from the coach batteries passes
through the power center unchanged, although it
is routed through a series of protective circuit
breakers.
INVERTER/CHARGER AND CIRCUIT
BREAKER LOCATIONS
·
1500W Inverter/Charger Unit:
The inverter/charger is located on the upper
rear wall of the battery compartment. The in-
verter/charger has a power/reset switch and
two circuit breakers to protect the inverter
and the AC input source from overloads. See
the Heart Interface operation information for
complete explanation and instructions on this
system.
·
Inverter Control Panel: The Heart Interface
inverter/charger also has a remote monitor/
control panel that can be programmed for
several charging configurations.
See the Xantrex/Heart Interface remote panel
instructions in your Owners InfoCase for
complete information and specific configura-
tion directions.
·
12-Volt House Circuit Breakers: The 12-
volt house breaker panel contains pop-out
breakers; push in to reset. The breakers are
clearly labeled for the circuits which they
protect.
*Typical view of breaker panel. Actual breaker labels
may vary according to appliance and equipment options.
Fuses and breakers are labeled on panel.
110-VOLT CIRCUIT BREAKERS
The 110-volt circuit breaker panel protects all
110-volt components in the motor home from
either an overload on the circuit or a short in the
wiring or component itself. When an overload or
Do not store items too closely around
the inverter unit in the storage com-
partment. The inverter generates heat
while operating and needs unre-
stricted airflow for proper cooling.
CAUTION
Inverter Charger Control Panel
Electrical Load Center
Model 40E or 40K