![background image](http://html1.mh-extra.com/html/winnebago/travato-2019/travato-2019_operators-manual_987526080.webp)
SECTION 8 –
ENTERTAINMENT
8-4
6. Rotate antenna to illuminate the last flickering
LED light.
7. Repeat Steps 5 and 6 to pinpoint signal
reception.
NOTE: Refer to television manufacturer’s
instructions to scan for available
channels.
Further Information
See the antenna manufacturer’s user guide
provided in your InfoCase for complete operating
and maintenance information.
TV SIGNAL AMPLIFIER
The TV Signal Amplifier is built into the
antenna and can be turned on or off with a power
switch.
An indicator light will illuminate when the
switch is on and the signal amplifier is active.
CABLE TV CONNECTION
The cable television input connection is
located on the left sidewall.
EXTERIOR CABLE TV – 12V
CONNECTION
–If Equipped
The exterior cable TV/12-volt connection
receptacle on your motorhome provides
connection for use of a TV and/or 12-volt device
for your outdoor entertainment.
AUDIO/VIDEO SYSTEM
CONNECTION
A Composite Connection is provided in the
cabinet near the TV for connection of your choice
of DVD player, home theater system, or satellite
receiver.
The cable is connected to the lounge TV.
TV Signal Amplifier Power Switch
(Located in an overhead cabinet or mounted
on a wall near the TV)
-Typical View
• Power
Switch
Cable TV Input Connection
(Located on the left sidewall)
*Model 59G shown
Exterior Cable TV / 12-Volt Connection
(Located on passenger sidewall)
-Typical View