![background image](http://html1.mh-extra.com/html/winnebago/tour-2012/tour-2012_operators-manual_987524175.webp)
12-11
SECTION 12 –
MISCELLANEOUS
To Operate Ceiling Ventilator
1. Press the wall switch to raise the dome about
3" or more to allow the turbine fan to operate.
(
A built-in safety switch will not let the fan
motor run unless the dome is partially open
).
2. The turbine fan will start automatically as the
vent dome is raised and stop as the vent dome
is lowered and closed. (
Fan Power switch
must be ON and Fan Speed knob in a position
other than 0-Off
.)
3. Turn the Fan Speed knob to the desired level
(1-Low, 2-Med, 3-Hi).
4. Open a window or door to provide airflow.
Direction of airflow is determined by which
window or door is opened.
NOTE: For best results, close all other roof
vents, windows, and doors, then open
one (1) window the farthest distance
from the roof ventilator. The fan speed
selector on the ventilator allows you to
control the amount of circulation you
need at any time.
5. If you want the vent dome raised without the
fan running, turn Off either the Fan Power
switch or Fan Speed knob (0-Off ).
NOTE:In event of power failure the ventilator
dome may be opened or closed manually
using the Dome Crank knob.
Ventilator Thermostat
-If Equipped
The thermostat lets you set a temperature at
which you want the ventilator to open
automatically and exhaust room air.
This function can be disabled by sliding the
temp selector lever to the OFF position.
Further Information
See the power ventilator manufacturer’s
operating instructions supplied in your InfoCase
for further instructions, care, and cleaning
information.
POWER ROOF VENTILATOR –
BATH
–If Equipped
The 3-speed turbine vent is controlled by a
switch on the wall to raise or lower the dome.
The turbine fan will start automatically as the
vent is raised, and stop as the vent is lowered.
Temperature Selector/
On-Off Switch
Fan Power
Switch
Fan Speed
Selector
Dome Crank
Power Roof Ventilator
-Typical View
Fuse