9-9
SECTION 9 –
FURNITURE AND SOFTGOODS
DIGITAL SLEEP AIR BED
by Innomax
®
–If Equipped
The air bed operates on 120-volt AC
household current only, so you must have the
shoreline plugged in, the generator running, or
inverter power (if equipped) to adjust the air
pressure settings in this bed.
If loss of power occurs, the memory setting
will default to the pre-set threshold and re-
programming the memory setting will be
necessary.
NOTE: If your bed is equipped with the power
lift feature, it is recommended to deflate
the air mattress to 25 or below when
elevating the bed into the fully upright
position. This will help prolong the life
of your air mattress.
Further Information
For complete operating instructions and
cautions, see the Innomax air bed user guide
included in your InfoCase.
BED - POWER LIFT
–If Equipped
Your coach may be equipped with a power
lift/lower mechanism that raises and lowers the
head of your bed with a touch of a switch to best
suit your comfort needs.
The power lift/lower control switch is located
on the bedroom nightstand (some models may be
equipped with a switch on each nightstand).
•
Press the control switch UP to raise the head
of the bed.
•
Press the control switch DOWN to lower the
head of the bed.
NOTE: The power lift/lower mechanism is
equipped with an interlock feature, which
will not allow you to retract the bedroom
slideout unless the bed is in the fully
• Display
Indicator
• Adjust to
Firmer Setting
• Adjust to
Softer
Setting
• Bed-Fill feature for a
freshly made look
• Memory feature
allows instant return
to your favorite sleep
number
Air Bed Remote Control
WARNING
Keep people away from operating
mechanism and pinch hazard areas
during use. Failure to do so could cause
injury.
Power Lift/Lower Control Switch
(Located on Bedroom Nightstand)
-Typical View
