7-13
SECTION 7 –
PLUMBING
6. Turn the Eco-Hot valve to the pre-heat
position.
7.
Connect Air Pressure.
Connect a “blow-out”
plug to the city water inlet (located on the
lower left of the Water Center Panel). Then,
use a compressed air hose regulated to 30 psi
or less to force air through the system.
A “blow-out” plug can be purchased at any
Winnebago Industries
®
dealer.
• Lift up on the access panel to
expose the water pump.
-Typical View
• The water pump strainer is
located to the left and down of
the pump.
-Typical View
To Clean Pump Strainer
•
Twist the inlet cap (bowl)
“counter-clockwise” to
unscrew from the strainer
assembly.
•
Remove the bowl and pull
the strainer screen out of
the bowl to tap out any
particles and rinse clean.
•
Insert the strainer screen
back into the bowl, then
screw the bowl back onto
the strainer assembly.
-Typical View
• Rotate the Eco-Hot selector to
the left to the pre-heat position.
-Typical View
