4-5
SECTION 4 –
APPLIANCES AND SYSTEMS
SYSTEMS MONITOR PANEL
The Systems Monitor Panel provides a
convenient central location for checking the
condition of all utility systems in your
motorhome.
At the touch of a button, this panel will display
the holding tank level and the house battery
condition. When operated, the indicator lights
tell you that the water pump is on.
Holding Tank Level
Press and Hold the GRAY switch to show
approximate level on the monitor lights.
The approximate fluid level is measured by
sensors on the sides of the tank. There is
generally more fluid in a tank than indicated on
the monitor panel.
For example, if the fluid level is 1-2” below
the FULL sensor, the monitor will show the level
to be only 2/3 even though the tank is nearly full.
If a tank is about 1/4 full, the monitor will
register an empty tank because the fluid level is
below the 1/3 sensor even though there is still
fluid in the tank.
However, when the indicator reads FULL, the
tank is actually full.
Propane Gas Level
Press and Hold the LPG switch to show
approximate propane tank level on the monitor
lights.
The propane level is registered by a sending
unit on the tank. The gauge mounted on the side
of the tank will give a more accurate indication of
actual tank level if needed.
Systems Monitor Panel
(Model 59P Shown)
-Typical view
Systems Monitor Panel
(Model 59PX Shown)
-Typical view
• Generator
switch
• Generator Hour-meter
• Monitor
lights
• GRAY
switch
• LPG
switch
