![background image](http://html1.mh-extra.com/html/winnebago/2015-sunstar/2015-sunstar_user-manual_987457038.webp)
SECTION 3 -
DRIVING YOUR MOTORHOME
3-12
FRONT SERVICE ACCESS
(HOOD)
The hood panel can be opened for access to
service items such as:
•
Windshield Washer Fluid Reservoir
•
Brake Fluid Reservoir
•
Generator Oil Dipstick
To Open Hood
Unlock front Hood Locks with the provided
Hood Lock Key (located on key ring). Lower
hood into open position.
To Close Hood
•
Swing hood panel up into closed position.
•
Press top edge of hood panel in with palms of
hands, while locking Hood Locks.
ENGINE ACCESS – INTERIOR
Front Engine Cover
(Located between cab seats)
NOTE: Take precautions to protect carpet and
interior furnishings when removing
engine cover. The underside of the engine
cover could contain deposits of oil and
fuel or other engine fluids and
substances that could damage fabrics
and interior furnishings.
•
To remove the engine cover,
insert the
supplied hex wrench into the hole (located on
the top center
or
the front edge of the engine
cover, depending on model).
•
Turn the hex wrench to the left (counter-
clockwise) to unlock.
NOTE: On certain models, there may also be
additional screws to remove at the lower
front corners on each side of the engine
cover. See following photo.
Hood Locks
-Typical View
• Insert hex wrench into the hole located on the
top center of the engine cover (as shown)
or
the front edge of engine cover (depending on
model) to unlock.
-Typical installation shown