7-17
SECTION 7 –
PLUMBING
Set Up Winterization Valves
3. Turn Winterization Valve 1 to “Water Heater
Bypass” position to avoid filling water heater
with antifreeze.
.
4. Turn Winterization Valve 2 to the “Winterize”
position.
5. Remove and save the protective cap from the
end of the antifreeze siphon tube (which
connects to Winterization Valve 2). Insert the
end of the siphon tube into a pail or other
container with 2 to 5 gallons of non-toxic RV
antifreeze solution.
.
NOTE: Ensure that all drain valves are
CLOSED before pumping RV antifreeze
into the water system.
Refer to the “Water System Drain Valve
Locations” chart at the end of this
section for valve locations on your
model.
Galley Cold Water Faucet/Ice Maker
Filter Assembly
(Located below galley sink)
Winterization Valve 1
(See the “Water System Drain Valve Locations” chart
at the end of this section for location on your coach)
Winterization Valve 2
(See the “Water System Drain Valve Locations” chart
at the end of this section for location on your coach)
RV Antifreeze Siphon Tube
(See the “Water System Drain Valve Locations” chart
at the end of this section for location on your coach)
-Typical View
• Insert into container of RV water system
antifreeze
