![background image](http://html1.mh-extra.com/html/winnebago/2014-adventurer/2014-adventurer_operators-manual_987454160.webp)
SECTION 12 –
MISCELLANEOUS
12-6
Remote Operation
•
ON-I/II:
Press ON-I/II button once for low
heat output. Press a second time for high heat
output. Press a third time for airflow without
heat.
•
TIMER:
Press ON-I/II button and select heat
output before setting the timer.
Press Timer button and select preset run time
(.5 hour, 1 hour, 2 hours, or 4 hours) shown on
the Indicator Panel (see following photo).
•
FIRE:
Press Fire button once to illuminate the
fire indicator (located on Indicator Panel) and
for the charcoal to begin burning. Press again
to diminish flame.
•
OFF:
Press once to turn Fireplace off.
Indicator Panel
Further Information
Refer to the Fireplace user guide provided in
your InfoCase for complete operating and
maintenance instructions, as well as safety
precautions.
ENTRY STEP – ELECTRIC
The power switch for the electric entry step is
located to the left of the main entry door as you
enter the coach.
The step has several automatic extend/retract
functions that are controlled by the position of a
sensor mounted on the inner edge (hinge side) of
the screen door.
• ON-I/II
• TIMER
• FIRE
• OFF
Fireplace Remote Control
(Located inside InfoCase)
Indicator Panel
(Located behind front grill)
• TIMER INDICATORS
• LOW / HIGH INDICATORS
• FIRE
INDICATOR
WARNING
Do not use step unless fully extended.
Do NOT stand on step when vehicle
ignition switch is turned to either the “On”
or “Start” position.
The step will automatically retract, which
may cause personal injury.
Entry Step Switch
(Located near the entrance door)
-Typical View