SECTION 12 –
MISCELLANEOUS
12-10
The turbine fan will start automatically as the
vent is raised, and stop as the vent is lowered.
To Operate Ceiling Ventilator
1. Press the wall switch to raise the dome about
3" or more to allow the turbine fan to operate.
(
A built-in safety switch will not let the fan
motor run unless the dome is partially open
).
2. The turbine fan will start automatically as the
vent dome is raised and stop as the vent dome
is lowered and closed. (
Fan Power switch
must be ON and Fan Speed knob in a position
other than 0-Off
).
3. Turn the Fan Speed knob to the desired level
(1-Low 2-Med 3-Hi).
4. Open a window or door to provide airflow.
Direction of airflow is determined by which
window or door is opened.
NOTE: For best results, close all other roof
vents, windows, and doors, then open
one (1) window the farthest distance
from the roof ventilator. The fan speed
selector on the fan allows you to adjust
the amount of circulation you need at any
time.
5. If you want the vent dome raised without the
fan running, turn Off either the Fan Power
switch or Fan Speed knob (0-Off ).
NOTE:In event of power failure, the ventilator
dome may be opened or closed manually
using the Dome Crank knob.
Further Information
See the power ventilator manufacturer’s
operating instructions supplied in your InfoCase
for further instructions, care, and cleaning
information.
TOOL AND LADDER STORAGE
The roof ladder extension and various tools
supplied with your coach are stored in one or
more of the exterior storage compartments.
Your model may not be equipped with all
items shown and some items may not be
available on your model.
NOTE: Typical method of tool storage shown.
Actual features and locations may vary
depending on model, available
equipment, and storage compartment
configuration.
Fan Power
Switch
Fan Speed
Selector
Dome Crank
Power Roof Ventilator
Fuse
Roof Ladder Extension
