![background image](http://html1.mh-extra.com/html/winnebago/2008-ellipse/2008-ellipse_operators-manual_987442050.webp)
SECTION 4 –
APPLIANCES AND SYSTEMS
4-2
operate on 120-VAC household current if the
shoreline is connected or the auxiliary
generator is running.
AU (
Automatic Mode) -
Refrigerator will
automatically start operating on 120-VAC
household current if the shoreline is
connected or the auxiliary generator is
running. If electricity is lost, it will
automatically switch over to LP gas operation
if gas is available.
NOTE: To avoid discharging house batteries,
turn the Inverter OFF or switch the
refrigerator to GAS mode anytime you
are running the refrigerator with the
shoreline unplugged..
The refrigerator draws its electrical
current through the inverter and not
directly from the shoreline.
If the refrigerator is in ELECTRIC or
AUTO mode, it will continue to draw
power from house batteries through the
inverter when the shoreline is unplugged
unless the Inverter is turned OFF.
•
Press the
SET TEMP
button to change
temperature setting from 1 to 9 on display.
Start at the ‘coldest’ setting to ensure coldest
temperature in the freezer compartment, then
adjust warmer as necessary after cold* food
has been added.
*
The refrigerator will retain temperature
more efficiently if food is already cold before
placing inside.
Further Information
For further information and operating
cautions, see the refrigerator operating
instructions included in your InfoCase.
ICE MAKER
–If Equipped
Some refrigerators are equipped with an
automatic ice maker system. The ice maker unit
is installed in the freezer compartment of the
refrigerator.
See the refrigerator manufacturer’s operation,
care and maintenance information in your
InfoCase.
NOTE: A water shut-off valve for the ice
maker is located near the water faucet filter
inside the galley cabinet beneath the sink.
REFRIGERATOR SERVICE
ACCESS COMPARTMENT
(Exterior)
The exterior refrigerator service compartment
allows access to the rear of the refrigerator for
inspection, maintenance and service.
To Open:
1. Use a screwdriver or coin to turn the latch
knobs to the vertical position as shown.
2. Remove the door from the opening.
To Close:
1. Replace the door into the opening.
2. Push the latch knobs in while turning to the
horizontal position as shown.
Refrigerator Access Door Latches
Refrigerator Access Compartment