SECTION 8 –
ENTERTAINMENT
8-2
DVD HOME THEATER SYSTEM
–If Equipped
The available DVD home theater system
operates from 120-volt AC household current
only, so you must have either the shoreline
connected, the generator running, or the inverter
turned on (if equipped).
The TV is connected to the Home Theater
System which plays through theater speakers in
the lounge area of the coach.
Connect Theater
Speakers
•
Press the Speaker switch on the
dash to TV position to connect
the theater speakers to the Home
Theater system.
NOTE:The Aux. Battery Disconnect switch must
also be on while listening to Theater
Sound because the audio relay is
powered by house batteries. If the Aux
Batt switch is off, the speakers will not
emit any sound.
Set TV Video Input
•
Turn On both TV and DVD player.
•
Press SOURCE button
on the remote or side
of TV and select
“Video 1” or “AV1”
input on the TV or
remote.
The TV screen will
display the DVD
player logo when the
correct input is
selected.
Play DVD with Theater Sound
•
Insert DVD into player. DVD will begin to
‘load’ automatically. TV screen will typically
show “READING” or “LOADING.”
•
The DVD may load directly to the
main title/menu screen or it may begin
to play previews. You may be able to
skip previews if desired by pressing
the ‘Next’ button until you see the main menu
screen.
•
When the main menu
screen appears, use the
arrow buttons on the
remote to select the desired
entry or press the ENTER
or PLAY buttons on the
remote (or ‘Play’ button on
DVD player) to begin playing the feature.
•
Volume is adjusted with the DVD remote.
TV Sound through Home Theater
Speakers
When watching TV programs (broadcast,
cable or satellite), the TV normally plays sound
through its own built-in stereo speakers. To
connect TV sound output to home theater
speakers for a richer sound quality, follow these
steps:
•
Press Speaker switch on the dash to TV
position.
•
Turn the TV and DVD player On.
•
Select the TV channel you wish to watch.
•
Press FUNCTION button on DVD player or
remote to set DVD player to “AV IN.”
•
The DVD home theater audio output can be
switched from 2-channel or 6-channel mode
by depressing the STEREO/HT button on the
remote. See below photo.
NOTE: In 6-channel mode, not all speakers will
be active all of the time. The audio output
of each individual speaker is dependent
on the TV/Satellite audio source.
•
Select TV channels and adjust theater speaker
volume with remote for either the TV or DVD.