Winncare MANGAR, Инструкция пользователя

Страница: 9 / 44

9
ENGLISH
ELK
Specifications
Maximum load: 450kg (992lbs)
Weight of ELK: 3.6kg (8lbs)
Dimensions: 57cm (W) x 50cm (D) x 56cm (H)
(22
½
” W x 19¾” D x 22” H)
Max. air pressure: 0.35 bar (5psi)
Max/Min temperature: +50°C / -15°C
(122°F / 5°F)
56cm
50cm
57cm
Trouble shooting guide
Problem Remedy
• Compressor does not run when the 4 way
hand control buttons are pressed.
• Ensure that the Airflo 24 has been switched
on.
• Ensure the charger is disconnected from the
Airflo
• Check that there are no kinks in the air hose.
• Compressor keeps stopping when trying to
inflate the lifting aid.
• Check that there are no kinks in the air hose.
• No Battery status indicator Lights
• Unit switched off -turn unit on.
• Thermal fuse on battery has tripped – Allow
unit to cool down 60-90minutess. A solid red
LED will display after temperature normalizes
and fuse resets. This will have reset the
charge sequence. To avoid damage to the
Airflo after 12hour charge, disconnect from
charger and allow another 60-90minutes for
battery cool down.
• Bottom Battery status indicator solid Red
Light
• Low Battery Capacity, recharge.
• Bottom Battery status indicator Flashing Red
every 2 seconds
• Internal Pump Temperature too high –
allow Airflo to cool down 60-90mins before
attempting a lift.
• Bottom Battery status indicator flashing Red
every ½ second
• Battery Voltage low – Re charge. If occurs
repeatedly replace the battery.
• Compressor causes electrical interference
with another piece of electrical equipment.
• Move either the compressor or other item
further away from each other until the
interference stops.