Winncare Automorpho, Руководство пользователя

Страница: 7 / 20

ASKLÉ
SANTÉ
- 5 -
NOTES:
 Contact the store or service provider from which the product was purchased for
any assistance relating to the set-up, use or repair of the product.
I
NSTALLATION
1. Unroll the mattress.
2. Position it on the base of the bed, using the "head" and "feet" symbols on the
cover.
3. Hang the compressor on the end of the bed (feet end) using the hooks.
4. Run the electric cable for the compressor along the bed to the nearest power
socket, attach it to the side of the bed using the 2 hooks on the cable and switch
on the power: The lights will turn on for 1 second and a beep will sound.
5. If you have a rapid inflation pump, follow these steps. If not, proceed to step 9.
6. Open the CPR valve, positioning it to OPEN, .
7. Connect the rapid inflation pump to the CPR.
Keep the CPR and the pump on the same line to avoid jamming the CPR with the
weight of the pump. Improper use may lead to reduced airtightness of the CPR.
8. Press down on the rapid inflation button on the pump until the mattress is inflated
(around 1 minute) - Note: The level of inflation is not important as this will be
adjusted automatically by the compressor.
9. Close the CPR valve, positioning it to CLOSED, .
10. Connect the mattress to the compressor.
11. After the timer light has gone off, the patient can be placed on the mattress.