Winmate Windy Plus, Руководство пользователя

Страница: 8 / 34

Windy Plus Box PC
User Manual Windy Plus
CHAPTER 2 GETTING STARTED
Congratulations for you to purchase this rugged box computer.
This chapter tells you step by step how to boot up the box computer. You can find instructions
for the following procedures:
Connecting the AC Power
Our box PC can operate either on the external AC power adapter or internal battery power. It is
suggested that you use AC power when you boot up the box PC first time.
Caution !!!
Use only the AC adapter included with your box PC. Using aftermarket AC adapter may
damage the box PC. When you disconnect the AC adapter, disconnect from the electrical
outlet first and then from the box PC. When unplugging the connector, always hold the
plug head. Never pull on the cord.
1. Make sure that the box PC has been shut down.
2. Rotate the box PC on the proper side and take off the battery cover, then put battery pack
into the battery slot with cover.
4. Open the IO protect cover, then plug the DC cord of the AC adapter to the power connector
of the box PC.
5. Plug the female end of the AC power cord to the AC adapter and the male end to the power
electrical outlet.
6. Boot up the Box PC few seconds later after power is being supplied from the electrical outlet
to the AC adapter.
7. When the AC adapter is connected, the Battery Pack is also under charging. You can check
the battery status LED indicator to see the currently progress. The indicator turns to green