Winmate W10IB3S-PCH1AC, Руководство пользователя

Страница: 5 / 53

8

Do not leave this equipment in an uncontrolled environment where the storage temperature
is below -20° C (-4°F) or above 60° C (140° F). It may damage the equipment.

CAUTION – Use the recommended mounting apparatus to avoid risk of injury.

WARNING – Only use the connection cords that come with the product. When in doubt,
please contact the manufacturer.

WARNING – Ground against electrostatic damage to the device by taking the following
preventive steps:
o
Cover workstations with approved anti-static material. Use a wrist strap connected to a work
surface and properly grounded tools and equipment.
o
Use anti-static mats, heel straps, or air ionizer for added protection.
o
Handle electrostatic-sensitive components, PCB’s and assemblies by the case or the edge of
the board.
o
Avoid contact with pins, leads, or circuitry.
o
Turn off power and input signals before inserting and removing connectors or test equipment.
o
Keep the work area free of non-conductive materials, such as ordinary plastic assembly aids
and Styrofoam.
o
Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that are conductive.
o
Always lay drivers and PCB’s with the component side down on anti-static foam.
Important Information
Federal Communications Commission Radio Frequency Interface Statement – For USA
This device complies with part 15 FCC rules. Operation is subject to the
following two conditions:

This device may not cause harmful interference.

This device must accept any interference received including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class "A" digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which